TSM 0515D

DC/DC Converters TSM Series, 1 Watt Features ◆ SMD package (SOIC-14/18) ◆ Construction in lead frame technology ◆ Isolated single and dual output ◆ I/O isolation 1‘000 VDC ◆ High efficiency ◆ Operating temperature –40°C to +85°C ◆ Reflow solder temperature up to 245°C ◆ High accuracy of Pin co-planarity ◆ Available in tape and reel package ◆ Lead free design, RoHS compliant ◆ 3-year product warranty The TSM series are isolated DC/DC converters with 1W output power implemented in a molded plastic package with a pin accuracy suitable for automated SMDproduction. The devices can be soldered without any problems in a high temperature lead free solder process. With their small footprint these converters are the economical solution for point of load power conversion, ground loop elimination, noise reduction and digital interface applications. Models Output current max. Efficiency typ. TSM 0505S Ordercode 5 VDC 200 mA 80 % TSM 0509S 9 VDC 110 mA 78 % TSM 0512S 12 VDC 80 mA 80 % TSM 0515S Input voltage 5 VDC ±10% Output voltage 15 VDC 65 mA 81 % TSM 0505D ±5 VDC ±100 mA 75 % TSM 0512D ±12 VDC ±40 mA 79 % TSM 0515D ±15 VDC ±30 mA 79 % TSM 1205S 5 VDC 200 mA 81 % TSM 1209S 9 VDC 110 mA 78 % TSM 1212S 12 VDC 80 mA 81 % 15 VDC 65 mA 82 % TSM 1205D ±5 VDC ±100 mA 75 % TSM 1212D ±12 VDC ±40 mA 80 % TSM 1215D ±15 VDC ±30 mA 80 % TSM 2405S 5 VDC 200 mA 81 % TSM 2409S 9 VDC 110 mA 78 % TSM 2412S 12 VDC 80 mA 81 % TSM 1215S TSM 2415S 12 VDC ±10% 24 VDC ±10% 15 VDC 65 mA 82 % TSM 2405D ±5 VDC ±100 mA 75 % TSM 2412D ±12 VDC ±40 mA 80 % TSM 2415D ±15 VDC ±30 mA 80 % http://www.tracopower.com Page 1 of 5 DC/DC Converters TSM Series 1 Watt Input Specifications Input current no load / full load 5 Vin models: 30 mA / 260 mA typ. 12 Vin models: 15 mA / 110 mA typ. 24 Vin models: 8 mA / 55 mA typ. Surge voltage (1 sec. max.) 5 Vin models: 9 V max. 12 Vin models: 18 V max. 24 Vin models: 30 V max. Reflected input ripple current can be reduced by ext. 1–2.2 µF polyester film capacitor Input filter internal capacitors Output Specifications Voltage set accuracy ±3 % Voltage balance (dual output models) ±1 % max. Regulation – Input variation 1.2 % / 1 % change Vin – Load variation 20 – 100 % 10 % max. Ripple and noise (20 MHz Bandwidth) 120 mVpk-pk max. Temperature coefficient ±0.02 %/°C Short circuit protection limited 1 sec. max. Capacitive load single output models: 22 µF max. dual output models: 10 µF max. General Specifications Temperature ranges – Operating –40°C to +85°C – Case temperature +105°C max. – Storage –55°C to +125°C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at+25°C, ground benign) >2’000’000 h Isolation voltage (60 sec.) – Input/Output 1‘000 VDC Isolation capacity – Input/Output 40 pF typ. Isolation resistance – Input/Output >1‘000 Mohm Switching frequency 100 kHz typ. (frequency modulation) Frequency change over line and load ±30 % Environmental compliance – Reach www.tracopower.com/products/reach-declaration.pdf – RoHS RoHS directive 2011/65/EU Physical Specifications Casing material epoxy molding compound (flammability to UL 94V-0 rated) Package weight single output models: 1.5 g (0.053 oz), 1.8 g (0.064 oz) for 24 Vin dual output models: 1.8 g (0.064 oz), 2.2 g (0.078 oz) for 24 Vin Moisture sensitivity level 3 Reflow soldering profile (IPC/JEDEC J-STD-020D) peak temp. 245°C (10 sec. max.) 217°C for 90 sec. max. Convection reflow solder process is recommended Packaging www.tracopower.com/overview/tsm All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 5 DC/DC Converters TSM Series 1 Watt Outline Dimensions TSM Single Output Models 7.62 (0.3) (0.01) 0.25 S ± 4° 7.0 (0.28) *7.4 (0.29) (0.01) 0.1 S 0.25 2.0 (0.27) 6.8 (0.27) *7.8 (0.31) 6.5 (0.26) *8.1 (0.32) Seating Plane 0.2 M S P 9.2 (0.36) 0.6 2.54 (0.024) (0.1) 11.1 (0.44) NA 8 1 7 14 NA +Vo 8 8.0 (0.32) *8.3 (0.33) 14 NA 2.5 (0.1) 12.7 (0.5) 1 7 –Vin +Vin NA –Vo * Dimensios for 24Vin models NA = not available for electrical connection Dimensions in [mm], () = Inch Pin pitch tolerances: ±0.13 (±0.0051) Other tolerances: ±0.25 (±0.01) http://www.tracopower.com Page 3 of 5 DC/DC Converters TSM Series 1 Watt Outline Dimensions TSM Dual Output Models 10.16 (0.4) (0.01) 0.1 S 0.25 S Seating Plane (0.01) 0.25 2.0 (0.27) *0.0 6.8 (0.27) *7.8 (0.31) 6.5 (0.26) *8.1 (0.32) 7.0 (0.28) *7.4 (0.29) ± 4° 0.2 M S P 9.2 (0.36) 11.1 (0.44) 0.6 2.54 (0.024) (0.1) 10 1 9 NA 18 NA NA +Vo NA 10 8.0 (0.32) *8.3 (0.33) 18 2.5 (0.1) 15.24 (0.6) 1 9 –Vin +Vin NA Com –Vo * Dimensios for 24Vin models NA = not available for electrical connection Dimensions in [mm], () = Inch Pin pitch tolerances: ±0.13 (±0.0051) Other tolerances: ±0.25 (±0.01) http://www.tracopower.com Page 4 of 5 DC/DC Converters TSM Series 1 Watt Solder Pad Dimensions mm (inches) TSM Single Output Models 7.62 (0.3) 2.54 2.54 (0.1) (0.1) (0.1) 1.7 1.0 Min. TSM Dual Output Models 10.16 (0.067) 10.8 (0.425) 2.54 (0.039 Min.) (0.4) 2.54 2.54 2.54 (0.1) (0.1) (0.1) (0.1) 1.0 Min. (0.067) 1.7 10.8 (0.425) 2.54 (0.039 Min.) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www.tracopower.com Rev. July 15, 2022 Page 5 of 5